ASK FOR A QUOTE ON DIGITAL TRANSFERS HERE!

Our business hours are from 8:30 am to 5:00 pm Monday through Friday.

Conveniently located at 5440 East Speedway Blvd, Tucson, Arizona, 85712

Our phone number is 520 795-7446

 

This will help you fill out the approprate information.  The table helps you with an estimate for your project.  We will send you a written quotation via email, review your arwork or offer assistance to prepare artwork.
0/255 characters

Are You Considering Applying Your Own Transfer(s)? Please Read This.

If your iron is all heated up (around 310-315 degrees Fahrenheit or 280-290 degrees Fahrenheit for Polyester), it's time to get started! Do not use steam.

 Preheat your fabric with the iron for 5-10 seconds. The step is essential because it evaporates any moisture that could be in your fabric and could compromise your adhesive.

Now place the transfer on the fabric. And you're ready to apply heat.

Use medium pressure for 10 seconds without a parchment sheet and 15 seconds with a sheet.

After you're finished applying heat and pressure, wait until the transfer is cool to the touch and go ahead and peel up the carrier sheet. If applied correctly, the carrier sheet should peel off easily, leaving behind your design!

After you're done applying heat and pressure, wait about 10 seconds and go ahead and peel up the carrier sheet. If applied correctly, the carrier sheet should peel off easily, leaving behind your design!

You can reach us by email at  contactus@Graphic-Impact.com